Emergency and exit lights are designed to assist people in navigating out of a building or place of work safely and effectively. Below we’ve replied to your most common questions; you can also discover our inspection and safety services for emergency lighting here.
Emergency and exit lighting fixtures are a legal requirement for all public homes in Australia.
It’s generally in hospitals, cinemas, shopping centres, and company living, in addition to most places of work, to ensure occupants can thoroughly go out in the event of an emergency clearing.
Australian rule stipulates that emergency and exit lighting have to be working and frequently examined in all buildings which might be used by the general public. Our Emergency Electrician in St Albans has many years of experience installing, maintaining and testing emergency and exit lighting for our customers. If you want help with your emergency lighting, we are your go-to neighborhood electrician.
When are Emergency Lights required?
Exit and emergency lighting are required to assist occupants in thoroughly entering and exiting a building; the main requirement is wayfinding to evacuate all inhabitants adequately. For example, in a fire, the illuminated pathway can help to panic less and save you, the occupants, from getting lost.
Emergency lighting is designed to illuminate a clean and safe passage out of the building.
Exit and route-finder lights are a critical part of a business or public services building form to ensure your workers, guests or most people can sufficiently evacuate and keep away from any physical threat (like getting lost, tripping or falling). Emergency lighting fixtures must offer lights for a minimum of ninety minutes after the electricity has failed.
How do you install Emergency Exit lights?
Step One
First, we test that every device will be placed in suitable spots to create a clear passage for efficient wayfinding to emergency exits. We use your accredited fire safety plan as a guide.
Step Two
We pay careful attention to light up any steps, stairwells, landings, and areas with sudden or unexpected degree changes that could bring about a fall. We also ensure adequate lighting for corridor intersections and path changes.
Step Three
We recollect access factors to fire alarms and other areas that might be vital to your business. You can also add to this if there are different areas where you observed lighting is critical.
Step Four
We set up all lights in the specific spots and test this each couple of months (as required through the safety codes in your industry).
Emergency Electricians and Plumbers offers a complete installation at the side of current fortification services for your building’s emergency and exit lights wishes. We’re here to help your business or workplace and ensure you comply with the emergency lighting fixtures code requirements.
Should Emergency Exit lights be on all of the time?
While emergency lighting doesn’t want to be on all the time, the lights have to have their consistent control supply in the event the principal energy exits. Emergency lights must have their self-contained power source, which comes into impact if an electricity failure or emergency scenario occurs.
How do you Fix an Emergency Exit signal?
The safety requirements require emergency exit symptoms to be examined every six months. They must stay illuminated for at least 90 minutes and have a small “push to test” button on the casing.
If, for any reason, the light doesn’t remove night from (or remain illuminated) all through the testing time, we’ll troubleshoot to repair the hassle and replace any lighting fixtures that aren’t working. Testing your emergency lighting system and ensuring it’s working well at all times is a legal obligation.
If the lighting doesn’t skip the check, a certified electrician must be booked to fix the trouble. Contact us today for emergency light testing; we can let you know what needs to be done to get your emergency lighting fixtures compliant.
What about smoke alarms?
If you think smoke alarms are required in commercial homes, the fast answer is yes – industrial houses want smoke detectors and carbon monoxide detectors.
Smoke alarms and carbon monoxide alarms are legally required in all homes. Similarly, your emergency lighting systems have their personal batteries, which want to be inspected often.
For our commercial customers, we check emergency and exit lighting fixtures, smoke alarms and monoxide alarms in our preservation programs.
Need pressing help together with your Exit and Emergency Lights?
Contact Emergency Electricians and Plumbers for emergency light inspections, Consumer Unit Upgrades, and ongoing maintenance plans. We assist you in ensuring your building is safe and compliant and answer any questions about your responsibilities and requirements in a commercial setting.
